Published online 1 January 2007
Published in Agron J 99:304-310 (2007)
DOI: 10.2134/agronj2005.0038s
© 2007 American Society of Agronomy
677 S. Segoe Rd., Madison, WI 53711 USA
Soil Heat Flux Plates
Heat Flow Distortion and Thermal Contact Resistance
Thomas J. Sauera,*,
Tyson E. Ochsnerb and
Robert Hortonc
a USDA-ARS, National Soil Tilth Lab., 2150 Pammel Dr., Ames, IA 50011-3120
b USDA-ARS, Soil and Water Management Research Unit, St. Paul, MN 55108
c Dep. of Agronomy, Iowa State Univ., Ames, IA 50011

View larger version (31K):
[in this window]
[in a new window]
|
Fig. 2. Corrected plate heat flux density (Gm) for four plate designs vs. known heat flux density (G) in dry and saturated quartz sand using manufacturer-specified and measured plate dimensions and thermal conductivities ( m). Original flux plate data taken from Sauer et al. (2003).
|
|

View larger version (43K):
[in this window]
[in a new window]
|
Fig. 3. (Top) mean heat flux density of triplicate control and heat sink compound-coated flux plates in Waukegan silt loam and (bottom) the ratio of plate heat flux density (Gm) for plates with and without water-soluble heat sink compound.
|
|

View larger version (45K):
[in this window]
[in a new window]
|
Fig. 4. (Top) mean heat flux density of triplicate control and heat sink compound-coated flux plates in Waukegan silt loam and (bottom) the ratio of plate heat flux density (Gm) for plates with and without Arctic Silver 5 heat sink compound.
|
|
Copyright © 2007 by the American Society of Agronomy.